Close

Not a member yet? Register now and get started.

lock and key

Sign in to your account.

Account Login

Forgot your password?

Vent-Free Gas Logs

Clean Burning Vent Free Gas Logs

Vent free, ventless, and/or unvented gas logs are designed to burn the fuel 99% completely. This means that they burn “clean”. With a vent free appliance there is no soot, high levels of CO (carbon monoxide), or other dangerous gases vented into the room. Any byproduct of combustion is so minute that typical air turnover in the home washes it out. Home ventilation is important with any type of gas product. That said, the consumer can burn this appliance in his fireplace with the damper closed and allow the heat generated to enter the room.

In order to perform safely, code limits vent-free appliances to 40,000 btus. Units are required to have an Oxygen Depletion System (ODS) with safety pilot control, meet emmisions standards, zero yellow flame impingement, and meet clearance to combustibles.

Vent-Free Gas Log Facts

  • Have your fireplace inspected by a certified chimney sweep before you install any gas log set
  • Best room heater of the three types of gas logs
  • Vent-free gas logs are for supplemental and emergency heat only
  • Available in Natural or LP gas
  • Some models can use a remote, wall switch, thermostat, remote thermostat, and other accessories
  • Combustion air is drawn from the room.
  • Vent-free does not mean odor-free; have your fireplace professionaly cleaned. Logs don’t stink, dirty fireplaces do!
  • Vent-free appliances cannot be installed in a bedroom, bathroom, or any area considered to a “confined space”, unless under 10,000 btus and approved for such application
  • Vent-free gas logs must be installed in an approved vent-free firebox or operational woodburning fireplace
  • Logs are in a fixed position; they are not movable
  • All models at Bart Fireside come with a safety-pilot, Oxygen Depletion Sensor (ODS), and Lava Granules

Our Most Popular Vent-Free Gas Logs


FSNBRV by Monessen

  • Realistic Hard Ceramic Logs
  • Glowing Embers and Dancing Yellow Flame
  • Millivolt Control
  • Remote Control or Wall Switch Option
  • Stainless Steel main burners
  • Up to 36,000 Btu’s of heat
  • Factory mounted and tested components
  • Three Sizes – 18″, 24″, 30″
  • Piezo Ignition, ODS, Safety Pilot

 


 

FSTPFV by Monessen

  • 2006 Vesta Award Winner!
  • Glowing embers AND Log!
  • Millivolt Control
  • Remote Control or Wall Switch Option
  • Stainless Steel main burners
  • 38,000 btus max of heat output
  • Factory mounted and tested components
  • Three Sizes – 18″, 24″, 30″
  • Piezo Ignition, ODS, Safety Pilot
  • Ceramic Fiber Logs

 


FSMJFV by Monessen

 

  • Dancing Yellow Flame
  • Glowing Embers
  • Comes Standard with Variable Remote Control
  • Stainless Steel main burners
  • Up to 38,000 Btu’s of heat output
  • Factory mounted and tested components
  • Available in 27″ Size Only
  • Piezo Ignition, ODS, Safety Pilot

 


FSMORV by Monessen

  • Dancing Yellow Flame
  • Realistic hard ceramic logs
  • Millivolt Control
  • Remote Control or Wall Switch Option
  • Stainless Steel main burners
  • Up to 36,000 Btu’s of heat output
  • Factory mounted and tested components
  • Three Sizes – 18″, 24″, 30″
  • Piezo Ignition, ODS, Safety Pilot

 


FSCHFM by Monessen

  • Dancing Yellow Flame
  • Manual Control
  • Stainless Steel main burners
  • Up to 36,000 Btu’s of heat output
  • Factory mounted and tested components
  • Available in 24″ ONLY
  • Piezo Ignition, ODS, Safety Pilot
  • Ceramic Fiber Logs

 

 


FSSAR by White Mountain

  • Variable Remote Control
  • Glowing Embers
  • Glass Pebble Burner Design
  • Hard Ceramic Refractory Logs
  • 39,000 btus of heat output
  • Factory mounted and tested components
  • 18″, 24″, 30″ Sizes
  • Piezo Ignition, ODS, Safety Pilot

FSWWR by White Mountainempire white mountain wildwood vent free gas logs

  • Extended Emberbed Design
  • IPI Equipped with Variable Flame Height and Thermostat Control
  • Glowing Ember Center
  • 38,000 or 40,000 Btu’s Heat Output
  • 24″ and 30″ Sizes
  • IPI Ignition, ODS, Safety Pilot

 

 


FSSSAR by White Mountain

  • IPI Ignition System with Variable Flame Height and Thermostat
  • Glowing Embers vfsupersass
  • Hard Ceramic Refractory Logs
  • Up to 38,000 Btu’s Heat Output
  • 18″, 24″, and 30″ Sizes
  • IPI Ignition, ODS, Safety Pilot

 

 

 

 

 


Designer Series – See Thru by Monessen

  • Unique See-Thru Vent Free Design
  • Remote Control or Wall Switch Option
  • Stainless Steel main burners
  • 39,000 btus of heat output
  • Factory mounted and tested components
  • 27″ Width
  • Piezo Ignition, ODS, Safety Pilot
  • Ceramic Fiber Logs

 

 


FSVOFV by Peterson

  • Manual Control
  • Bedroom VersionAvailable
  • 16″ Size Fits Many Small Coal Burning Fireplaces
  • Also Available in 20″ and 24″ Sizes
  • Steel Main burners
  • 10,000 Btu Bedroom Model – 20,000 Btu Standard Model
  • Factory Mounted and Tested components
  • Piezo Ignition, ODS, Safety Pilot
  • Ceramic Logs